Skip to main content

Phew, De-Icing Euclid’s Instruments Worked. It’s Seeing Better Now

From its vantage point at the Sun-Earth L2 point, the ESA’s Euclid spacecraft is measuring the redshift of galaxies with its sensitive instruments. Its first science images showed us what we can expect from the spacecraft. But the ESA noticed a problem.

Over time, less light was reaching the spacecraft’s instruments.

Euclid launched on July 1st, 2023 and made its way to the Sun-Earth Lagrange 2 point, the same spot where the JWST resides. Euclid is basically a wide-angle telescope with a 600 MB camera. Using its suite of scientific instruments, it measures the redshift of galaxies in an effort to understand the accelerating expansion of the Universe. Its measurements support the mission’s main science goals: to understand dark matter and dark energy.

Euclid released its first images in November 2023. To describe them as dazzling was not an exaggeration. Those images whetted our appetite for more and built anticipation for the science results to come.

The first test images from the Euclid spacecraft. Credit: ESA/Euclid/Euclid Consortium/NASA, image processing by J.-C. Cuillandre (CEA Paris-Saclay), G. Anselmi. CC BY-SA 3.0 IGO or ESA Standard Licence

But as time went on, a problem common to spacecraft cropped up. Water vapour from Earth had accumulated on the spacecraft during construction. Over time, the water was released from different parts of the spacecraft by the vacuum of space. The water attached to and froze to the first object it came into contact with. Some of it froze into a thin layer of water ice on VIS, the telescope’s visible wavelength camera. The layer was no thicker than a strand of DNA, but the sensitive instrument was nonetheless impaired.

Euclid personnel couldn’t see the ice. Instead, they observed a growing decrease in the amount of light reaching VIS. VIS is extremely sensitive and is designed to deliver the best low-light sensitivity ever achieved over a broad range of wavelengths. But that sensitivity to light also makes it very sensitive to even a small drop in starlight caused by the thin film of ice.

ESA personnel spent months trying to devise a method of removing the ice, and on March 19th, they started implementing their plan.

This image shows Euclid's interior, VIS and NISP, and the path light will take as it reflects off of the spacecraft's mirrors. Image Credit: ESA
This image shows Euclid’s interior, VIS and NISP, and the path light will take as it reflects off of the spacecraft’s mirrors. Image Credit: ESA

Euclid has six different mirrors that collect light and deliver it to VIS and NISP, the Near-Infrared Spectrometer and Photometer. The team in charge of dealing with the ice problem devised a way to heat the spacecraft without compromising the instruments’ sensitivity. They planned to heat the mirrors one by one, and after the first mirror was warmed by 34 degrees F, the ice melted away.

“It was midnight at ESOC mission control when we de-iced the first two mirrors in the procedure. We were very careful with our timings, ensuring we had constant contact between the spacecraft and our ground station in Malargüe, Argentina, so we could be ready to react in real-time if there were any anomalies,” explained Micha Schmidt, Euclid Spacecraft Operations Manager.

“Thankfully, it all went as planned. When we saw the first analysis provided by the science experts, we knew that they would be very happy – the result was significantly better than expected,” Schmidt said.

“It was an enormous team effort over the last months to plan, execute and analyze the heating of selected mirrors onboard Euclid, resulting in the fantastic result we see now,” explained Ralf Kohley, Euclid Instrument Scientist and in charge of the anomaly review board.

This figure shows the results of the effort to warm up Euclid's mirrors and remove the ice. At about the 90-minute mark, the temperature reached the point where ice sublimes into water vapour. After that point, the amount of light the spacecraft collected rose dramatically. Image Credit: ESA/Euclid/Euclid Consortium. ESA Standard Licence
This figure shows the results of the effort to warm up Euclid’s mirrors and remove the ice. At about the 90-minute mark, the temperature reached the point where ice sublimes into water vapour. After that point, the amount of light the spacecraft collected rose dramatically. Image Credit: ESA/Euclid/Euclid Consortium. ESA Standard Licence

Since the light collection improved on the first attempt, the success also showed mission personnel exactly where the ice was and where it’s likely to collect in the future if the problem crops up again.

“The mirrors and the amount of light coming in through VIS will continue being monitored, and the results from this first test will continue to be analyzed as we turn this experiment into a core part of flying and operating Euclid,” Kohley said.

With this problem behind it, Euclid can now get back to work. Its goal is to measure galaxies out to redshift 2. This corresponds to looking back in time by 10 billion years. The spacecraft will do it gradually, measuring the shapes of galaxies and their corresponding redshifts. The spacecraft will also measure how their light is distorted by dark matter. Eventually, the telescope will measure the amount of dark matter and compare its statistical properties to those of the galaxies. Critically, it will measure them over long periods of time, leading to an understanding of how both change over time and a better understanding of dark matter, dark energy, and the acceleration of the expansion of the Universe, the spacecraft’s main scientific goal.

But none of that work can continue if the telescope can’t see properly. Even the thin film of ice impaired Euclid’s observations enough that it was a serious obstacle to progress.

Now that the ice is gone, Euclid can get back to work. And if the problem reappears, the Euclid team is ready to deal with it.

“We expect ice to cloud the VIS instrument’s vision again in the future,” explained Reiko Nakajima, VIS instrument scientist. “But it will be simple to repeat this selective decontamination procedure every six to twelve months and with very little cost to science observations or the rest of the mission.”

The post Phew, De-Icing Euclid’s Instruments Worked. It’s Seeing Better Now appeared first on Universe Today.



from Universe Today https://ift.tt/hiT0skm
via IFTTT

Comments

Popular posts from this blog

More Data and Machine Learning has Kicked SETI Into High Gear

For over sixty years, astronomers and astrophysicists have been engaged in the Search for Extraterrestrial Intelligence (SETI). This consists of listening to other star systems for signs of technological activity (or “technosignatures), such as radio transmissions. This first attempt was in 1960, known as Project Ozma, where famed SETI researcher Dr. Frank Drake (father of the Drake Equation) and his colleagues used the Robert C. Byrd Green Bank Telescope in West Virginia to conduct a radio survey of Tau Ceti and Epsilon Eridani. Since then, the vast majority of SETI surveys have similarly looked for narrowband radio signals since they are very good at propagating through interstellar space. However, the biggest challenge has always been how to filter out radio transmissions on Earth – aka. radio frequency interference (RFI). In a recent study, an international team led by the Dunlap Institute for Astronomy and Astrophysics (DIAA) applied a new deep-learning algorithm to data collecte...

The First Close-Up Picture of Star Outside the Milky Way

Like a performer preparing for their big finale, a distant star is shedding its outer layers and preparing to explode as a supernova. Astronomers have been observing the huge star, named WOH G64, since its discovery in the 1970s. It’s one of the largest known stars, and also one of the most luminous and massive red supergiants (RSGs). The star is surrounded by an envelope of expelled star-stuff, which could indicate it’s getting ready to explode. WOH G64 isn’t in the Milky Way; it’s in the Large Magellanic Cloud (LMC), the Milky Way’s largest satellite galaxy. Getting these detailed image is quite a feat for the ESO’s Very Large Telescope Interferometer. It’s also quite an accomplishment for the team of scientists behind the image. They’ve published their images and the results of their observations of the star in the journal Astronomy and Astrophysics. Their research is titled “ Imaging the innermost circumstellar environment of the red supergiant WOH G64 in the Large Magellanic ...

Planetary Surfaces: Why study them? Can they help us find life elsewhere?

Universe Today recently explored the importance of studying impact craters and what they can teach us about finding life beyond Earth. Impact craters are considered one of the many surface processes—others include volcanism, weathering, erosion, and plate tectonics—that shape surfaces on numerous planetary bodies, with all of them simultaneously occurring on Earth. Here, we will explore how and why planetary scientists study planetary surfaces, the challenges faced when studying other planetary surfaces, what planetary surfaces can teach us about finding life, and how upcoming students can pursue studying planetary surfaces, as well. So, why is it so important to study planetary surfaces throughout the solar system? “Planetary surfaces record the history of the Solar System, a history that’s almost entirely lost to us here on Earth,” Dr. Paul Byrne, who is an Associate Professor of Earth, Environmental, and Planetary Sciences at Washington University in St. Louis, tells  Uni...